A semi flexible heat shrinkable tube with hot melt adhesive in the inner layer. The outer layer is formed by radiation cross-linked polyolefin inner wall is a specially designed plastic nature; heated walls melt, and filled with the outer shrink pores or cracks, after cooling, uniform thickness, solid double wall pipe.
Working temperature -55 C ~125 C
Flame retardant UL224 VW-1
application
It is widely used in wiring and waterproofing of electronic devices, sealing and fixing of branches, the corrosion protection of metal pipelines, and prevention of loosening and falling off caused by relaxation of polymer chains, such as underwater lighting, automotive oil pipes, advanced wiring harness, etc.
2：1Double wall heat shrinkable casing (common type) | ||||||||||
SIZE | Post expansion size（mm） | Dimension after free contraction（mm） | ||||||||
Minimum inner diameter | Wall thickness | Minimum inner diameter | Total wall thickness | Wall thickness of the wall | ||||||
mm | IN | mm | IN | mm | IN | mm | IN | mm | IN | |
3/64 | 1.2 | 0.047 | 0.30 | 0.012 | 0.60 | 0.024 | 0.45±0.12 | 0.018±0.005 | 0.20 | 0.008 |
1/16 | 1.6 | 0.062 | 0.30 | 0.012 | 0.80 | 0.031 | 0.45±0.12 | 0.018±0.005 | 0.20 | 0.008 |
3/32 | 2.4 | 0.093 | 0.35 | 0.014 | 1.20 | 0.046 | 0.55±0.12 | 0.022±0.005 | 0.30 | 0.012 |
1/8 | 3.2 | 0.125 | 0.40 | 0.016 | 1.60 | 0.062 | 0.60±0.12 | 0.027±0.006 | 0.30 | 0.12 |
3/16 | 4.8 | 0.187 | 0.40 | 0.016 | 2.40 | 0.093 | 0.75±0.15 | 0.029±0.006 | 0.35 | 0.014 |
1/4 | 6.4 | 0.250 | 0.40 | 0.016 | 3.20 | 0.125 | 0.75±0.15 | 0.029±0.006 | 0.35 | 0.014 |
3/8 | 9.5 | 0.375 | 0.40 | 0.016 | 4.80 | 0.187 | 0.80±0.20 | 0.032±0.008 | 0.35 | 0.014 |
1/2 | 12.7 | 0.500 | 0.40 | 0.016 | 6.40 | 0.250 | 0.80±0.20 | 0.032±0.008 | 0.35 | 0.014 |
3/4 | 19.1 | 0.750 | 0.020 | 0.020 | 9.50 | 0.375 | 0.95±0.28 | 0.037±0.011 | 0.40 | 0.017 |
1 | 25.4 | 1.000 | 0.020 | 0.020 | 12.70 | 0.500 | 1.15±0.28 | 0.045±0.011 | 0.45 | 0.017 |
1-1/2 | 38.1 | 1.500 | 0.025 | 0.025 | 19.00 | 0.750 | 1.25±0.41 | 0.049±0.016 | 0.45 | 0.017 |
2 | 50.8 | 2.000 | 0.029 | 0.029 | 25.40 | 1.000 | 1.40±0.41 | 0.055±0.016 | 0.50 | 0.019 |
2：1Double wall heat shrinkable casing (ultra thin) | ||||||||||
SIZE | Post expansion size（mm） | Dimension after free contraction（mm） | ||||||||
Minimum inner diameter | Wall thickness | Minimum inner diameter | Total wall thickness | Thickness of film wall | ||||||
mm | IN | mm | IN | mm | IN | mm | IN | mm | 0IN | |
3/64 | 1.2 | 0.047 | 0.30 | 0.012 | 0.60 | 0.024 | 0.35±0.12 | 0.014±0.005 | 0.15 | 0.006 |
1/16 | 1.6 | 0.062 | 0.30 | 0.012 | 0.80 | 0.031 | 0.35±0.12 | 0.014±0.005 | 0.15 | 0.006 |
3/32 | 2.4 | 0.093 | 0.35 | 0.014 | 1.20 | 0.046 | 0.45±0.12 | 0.017±0.005 | 0.20 | 0.008 |
1/8 | 3.2 | 0.125 | 0.40 | 0.016 | 1.60 | 0.062 | 0.50±0.15 | 0.019±0.006 | 0.20 | 0.008 |
3/16 | 4.8 | 0.187 | 0.40 | 0.016 | 2.40 | 0.093 | 0.50±0.15 | 0.019±0.006 | 0.20 | 0.008 |
1/4 | 6.4 | 0.250 | 0.40 | 0.016 | 3.20 | 0.125 | 0.65±0.15 | 0.026±0.006 | 0.20 | 0.008 |
3/8 | 9.5 | 0.375 | 0.40 | 0.016 | 4.80 | 0.187 | 0.65±0.28 | 0.026±0.011 | 0.25 | 0.010 |
1/2 | 12.7 | 0.500 | 0.40 | 0.016 | 6.40 | 0.250 | 0.65±0.28 | 0.026±0.011 | 0.25 | 0.010 |
3/4 | 19.1 | 0.750 | 0.020 | 0.020 | 9.50 | 0.375 | 0.75±0.28 | 0.030±0.011 | 0.25 | 0.010 |
1 | 25.4 | 1.000 | 0.020 | 0.020 | 12.70 | 0.500 | 0.77±0.28 | 0.030±0.011 | 0.30 | 0.012 |
1-1/2 | 38.1 | 1.500 | 0.025 | 0.025 | 19.00 | 0.750 | 1.00±0.41 | 0.040±0.016 | 0.30 | 0.012 |
2 | 50.8 | 2.000 | 0.029 | 0.029 | 25.40 | 1.000 | 1.00±0.41 | 0.040±0.016 | 0.30 | 0.012 |
SIZE | Post expansion size（mm） | Dimension after free contraction（mm） | ||||||||
Minimum inner diameter | Wall thickness | Minimum inner diameter | Total wall thickness | Thickness of film wall | ||||||
mm | IN | mm | IN | mm | IN | mm | IN | mm | IN | |
1/8 | 3 | 0.118 | 0.57 | 0.022 | 1 | 0.039 | 1.00±0.28 | 0.039±0.010 | 0.50 | 0.020 |
1/4 | 6 | 0.236 | 0.57 | 0.022 | 2 | 0.079 | 1.00±0.28 | 0.039±0.010 | 0.50 | 0.020 |
3/8 | 9 | 0.354 | 0.64 | 0.025 | 3 | 0.118 | 1.40±0.28 | 0.055±0.010 | 0.61 | 0.024 |
1/2 | 12 | 0.472 | 0.80 | 0.031 | 4 | 0.157 | 1.78±0.38 | 0.070±0.010 | 0.76 | 0.030 |
3/4 | 19 | 0.748 | 0.93 | 0.036 | 6 | 0.236 | 2.25±0.55 | 0.088±0.020 | 0.76 | 0.030 |
1 | 24 | 0.940 | 1.00 | 0.040 | 8 | 0.315 | 2.54±0.55 | 0.100±0.020 | 1.02 | 0.040 |
1-1/2 | 40 | 1.570 | 1.00 | 0.040 | 13 | 0.512 | 2.54±0.55 | 0.100±0.020 | 1.02 | 0.040 |
4：1XR-H Dall HEAT SHRINKABLE TUBES | |||||||||||||
SIZE | Post expansion size（mm） | Dimension after free contraction（mm） | |||||||||||
Minimum inner diameter | Wall thickness | Minimum inner diameter | Total wall thickness | Thickness of film wall | |||||||||
mm | IN | mm | IN | mm | IN | mm | IN | mm | IN | ||||
4/1 | 4 | 0.157 | 0.40 | 0.016 | 1 | 0.039 | 1.00±0.28 | 0.039±0.010 | 0.50 | 0.020 | |||
8/2 | 8 | 0.315 | 0.40 | 0.016 | 2 | 0.079 | 1.00±0.28 | 0.039±0.010 | 0.50 | 0.020 | |||
12/3 | 12 | 0.472 | 0.50 | 0.20 | 3 | 0.118 | 1.40±0.28 | 0.055±0.010 | 0.61 | 0.024 | |||
16/4 | 16 | 0.630 | 0.60 | 0.024 | 4 | 0.157 | 1.78±0.38 | 0.070±0.010 | 0.76 | 0.030 | |||
24/6 | 24 | 0.945 | 0.75 | 0.030 | 6 | 0.236 | 2.25±0.55 | 0.088±0.020 | 0.76 | 0.030 | |||
32/8 | 32 | 1.260 | 0.80 | 0.031 | 8 | 0.315 | 2.54±0.55 | 0.100±0.020 | 1.02 | 0.040 | |||
52/13 | 52 | 2.050 | 0.80 | 0.031 | 13 | 0.512 | 2.60±0.55 | 0.100±0.020 | 1.02 | 0.040 | |||
